Trailer Step Plate, Weld-On, 3" x 10" x 10" x 15 degrees, LF or RR
This step plate is raw steel and requires welding to complete the installation.
It measures 10" x 10" with a 15 degrees rise to accept a fender.
- Made of 14 gauge steel
- Pre-Punched fender holes
- Pre-punched cutout for BULLET LED trailer marker lights
As advertised. You’ll need two sets:: RF and LR
If you’re replacing 4 steps.
I didn’t weld mine on. Local metal fabricator made back places with a 1.5” top overhang. I drilled two top holes and one under step. Mounted with 1/2 inch stainless bolts. 1.5 inch long. Steps need to be sprayed with galvanized paint.