Black E-Coated Drum and Hub. #41048
- Drum dimensions: 10" x 2-1/4"
- Bolt pattern: 5 on 4-1/2"
- Inner bearing: L68149
- Inner diameter: 1-3/8"
- Outer bearing: L44649
- Inner diameter: 1-1/16"
- Grease seal: 171255 or 168255
- Inner diameter: 1.718"
- Outer diameter: 2.565"
- Wheel bolt size: 1/2"-20
BEARINGS SOLD SEPRATELY
The drums fit perfectly, no problems.
Four out of the 5 studs sheared off the drum after about 3 trip to the lake and back. I'm stuck on the side of the road writing this while waiting for the tow truck.
Hi Andrew, Sorry to hear about your experience. The torque spec on all hubs with steel wheels should be 95lbs, and on hubs with aluminum wheels, the torque spec should be 120lbs. We have never ever seen this happen on a new hub unless it was over-torqued. If over-torqued, a hairline fracture can occur on the stud of the hub and once the wheel is in motion any type of bump in the road can fracture all the way and shear them off completely. Also if the hub is very old or the bearings gave way, that can cause a wobble in the hub, causing them to rip off the wheel at the lug nuts.
Quality is above expectations hope to get many years from this drum
I purchased a new 10” brake drum and bearing seal to replace a damaged drum on my Pacific boat trailer. Received great service at the counter, made my purchase, Installed the bearing and seal, and everything fit perfectly.