Atwood Hydraulic Brake Actuator Parts List and Schematic

boat trailer, safety, tips -

Atwood Hydraulic Brake Actuator Parts List and Schematic

Atwood's Unique Design for Superior Braking

  • Unique design creates more pressure on the brakes than in-line actuator systems.
  • Parts interchangeability between 6K and 8K actuators.
  • Lock-out feature allows use with standard hydraulic brakes for backing up. No need for specific free-backing brakes.
  • Disc brake actuators available specifically for use with disc brake systems. Supplies, even more, fluid pressure to brakes than standard hydraulic.
  • A breakaway device will set trailer brakes automatically should separation from tow ball occur.
Atwood Hydraulic Brake Actuator Schematic

Ordering Replacement Atwood Parts

Atwood Logo

Replacement Parts are no longer available, but we recommend using the UFP A-60s or A-75s. Some modifications may be needed. Possibly drilling new holes. 

  • Atwood Hydraulic Surge Brake Actuators for both DIsc and Drum Brake Applications.
  • Atwood 6,000 lb. Capacity Brake Actuators Include Model numbers: 82543, 83153, 84132, 84133, 88730, 88740
  • Atwood 8,000 lb. Capacity Brake Actuators Include Model numbers:
  • 83000, 83005, 83010, 83060, 8036

94 comments

  • Johnny wood

    Would you have Atwood 85736 master clyinder and price

  • Ryan Saunders

    I’m looking for a master cylinder for an atwood 85778. DO have a replacement.

  • Steve Hindman

    I bought a lund boat 21ft. Has your double axle braking trailer. Can you explain how this system works. I have problems with trying to get it off my ball hitch. I have to disconnect my reviewer and pull out leaving it hanging until I can wiggle it loose. I pull up on the lever ???

  • Greg

    Hello, I’m looking to rebuild my Atwood master cylinder.
    I’ve found Pat No on the surge brake
    4239252
    4223766
    Max Tongue load 900lbs.
    Class 4
    Max trailer 6000 lbs GVWR
    I’m looking for part# 85837 master cylinder rebuild kit, can I also buy part# 23375 wheel cylinder repair kits for both left and right side. I believe these are for 10" Atwood uni-servo brakes.
    This surge brake system is on a 1999 Jayco UDK12 pop-up camper.
    Thanks for any information.

    Greg

  • r scott corey

    Where do I find the list of part names for the numbered parts on the diagram?

Leave a comment

Please note, comments must be approved before they are published